Concrete mixer is a special tool for transporting concrete. Concrete corrodes steel and paint. During transportation, the concrete will solidify into hard blocks in a short time. Therefore, the concrete shall be carefully cleaned and adhered after each transportation. Keep the concrete in the concrete tank and the import and export of concrete mixing tank and vehicle clean, so as to prolong the service life of concrete mixing vehicle, reduce unnecessary economic losses, and bring you more wealth and income.
Then how to clean the water tank of the concrete mixer? The following describes the operation steps before and after each concrete loading, hoping to help you.
装载后，用清水冲洗入口，以清洁入口附近的剩余混凝土，以防止运输后干燥后混凝土吸附在入口上。 干燥的混凝土不易清洗。 每次运输混凝土时，都要用水冲洗进料口，以保持装载的混凝土入口湿润。 在施工现场卸货后，及时用自带的清洗水冲洗卸料斜槽，然后向混凝土储罐中添加一些清洁水，以保证车辆返回时混凝土储罐缓慢转动。 及时将水箱中的混凝土残渣干燥，以防止混凝土吸附在水箱内壁上。 当它到达搅拌站并重新装填混凝土时，首先要排掉水箱中的清洁水，然后重复相同的步骤。 在将混凝土运输到罐体和进料口时避免混凝土吸附； 装载混凝土时，请勿懒散，并用清洗水填充车辆随附的清洗水箱，并始终注意清洗水箱的水位，以免在清洗或进水时没有水；
After loading, wash the inlet with clean water to clean the remaining concrete near the inlet to prevent the concrete from adsorbing on the inlet after drying after transportation. Dry concrete is not easy to clean. Each time the concrete is transported, the feed inlet shall be flushed with water to keep the loaded concrete inlet wet. After unloading at the construction site, wash the discharge chute with its own cleaning water in time, and then add some clean water to the concrete storage tank to ensure that the concrete storage tank rotates slowly when the vehicle returns. The concrete residue in the water tank shall be dried in time to prevent the concrete from being adsorbed on the inner wall of the water tank. When it reaches the mixing plant and refills the concrete, first drain the clean water from the water tank, and then repeat the same steps. Avoid concrete adsorption when transporting concrete to tank and feed inlet; When loading concrete, do not be lazy, fill the cleaning water tank attached to the vehicle with cleaning water, and always pay attention to the water level of the cleaning water tank to avoid no water during cleaning or water inflow;
在工作时，仔细清洁油箱本体，进料口，卸料斜槽以及所有轮胎粘附在混凝土上的地方，以确保车辆的整体清洁。 采取一些步骤，使您的财富工具持续更长的时间。 带给您更多的财富。
When working, carefully clean the fuel tank body, feed inlet, discharge chute and all places where the tires adhere to the concrete to ensure the overall cleanliness of the vehicle. Take some steps to make your wealth tools last longer. Bring you more wealth.
The above is about the automatic self feeding mixer introduced to you http://www.jufengjiaobanji.com/ I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service