1. Never overhaul or lubricate the automatic power mixer during operation.
2. Lubricate each oil nozzle regularly, grease the shaft end sealing ring every 4 hours, and discharge sewage once a week.
3. After using the automatic mixer, add the required lubricating oil (roller shaft, roller, wire rope and other moving parts) at each lubricating point as required.
4. The gear and bearing of the gearbox of the automatic mixer make use of the rotation of the gear to splash the oil on the inner wall of the gearbox and flow into the bearing for lubrication. The oil level in the transmission should be maintained between the two lines on the dipstick. If the oil level is too high or too low, the temperature of each part will rise and the lubrication will be insufficient, which will lead to the increase of power loss and the slow running speed of the machine.
5. The lubricating oil selected for automatic mixer must have specific viscosity and viscosity temperature characteristics, low freezing point, good oxidation stability, no mechanical impurities and moisture, corrosion and wear materials. yes. Its quality index must conform to the national standard.
The purpose of automatic mixer is to effectively reduce wear and improve the service life of components. However, be careful when adding lubricating oil. The oil of new machine should be changed every 150 and 300 hours to remove the dirt not completely removed during commissioning. Always check the oil level at work to make up for your lack of time.
With the summary of Zhongke Jufeng blender, I hope it can help our customers. If you have anything you don't understand or ask for help, please click our website: http://www.jufengjiaobanji.com Or call consultation, we will try our best to solve for you