自上料搅拌车怎么上水?

 来源:http://www.jufengjiaobanji.com 日期:2021-11-27 发布人:admin
有不少家人们对自上料搅拌车如何进行上水存在疑问,以为自动上料搅拌车需要自己准备水管将水注进入搅拌罐,其实不需要。因为自动上料搅拌车是自带水箱的,在搅拌混凝土前操作员将水箱上满水就可以。
Many families have doubts about how to water the self loading mixer truck. They think that the automatic loading mixer truck needs to prepare its own water pipe to inject water into the mixing tank. In fact, it is not necessary. Because the automatic feeding mixer has its own water tank, the operator can fill the water tank with water before mixing concrete.
图为中科聚丰自动上料搅拌车正在为水箱注水。水箱位于搅拌罐正下方,两边水箱相互连接、相对布局,总容量600升,搅拌车配备“自吸式”的24V大容量水泵,吸水迅速,3分钟时间就能把水箱灌满。
The picture shows Zhongke Jufeng automatic feeding mixer filling the water tank. The water tank is located directly below the mixing tank. The water tanks on both sides are connected and arranged relatively, with a total capacity of 600 liters. The mixing truck is equipped with a "self-priming" 24V high-capacity water pump, which absorbs water quickly and can fill the water tank in 3 minutes.
除了外吸水泵、大容量水箱,自动上料搅拌车还配备自动注水系统。待水箱灌满水后,驾驶员在驾驶室操作启用水泵,自动注水系统就会将水箱里的水注进搅拌罐,与其他原料混合,共同搅拌混凝土。
In addition to suction pump, large capacity water tank and automatic feeding mixer, it is also equipped with automatic water injection system. After the water tank is filled with water, the driver operates the water pump in the cab, and the automatic water injection system will inject the water in the water tank into the mixing tank and mix it with other raw materials to mix the concrete together.
因此那些繁琐的步骤比如自己准备水管、再费力将水灌进高处的搅拌罐口等是根本不需要的,在自动上料搅拌车设计之初,这些繁琐步骤已经被打包省掉,毕竟便利、效率才是自上料搅拌车的设计初衷。
Therefore, those cumbersome steps, such as preparing the water pipe by yourself and pouring water into the mixing tank mouth at a high place, are not needed at all. At the beginning of the design of the automatic feeding mixer, these cumbersome steps have been packaged and saved. After all, convenience and efficiency are the original design intention of the feeding mixer.
自动注水系统另一大用处就是在每天作业结束时,将搅拌罐清洗干净,防止混凝土凝固于罐内影响下的使用。
Another great use of the automatic water injection system is to clean the mixing tank at the end of each day's operation to prevent the concrete from solidifying in the tank and affecting the use of the next day.
既然搅拌罐内部由自动注水系统清理,搅拌罐外部包括整个搅拌车的车身当然也得清理干净,为此,中科聚丰自动上料搅拌车配备了高气压水枪,专用于清洗搅拌车车身,能迅速将污垢剥离、冲走,还搅拌车一个精神干净的“面貌”,经济更便利。
Since the inside of the mixing tank is cleaned by the automatic water injection system, the outside of the mixing tank, including the whole body of the mixing truck, must also be cleaned. Therefore, Zhongke Jufeng automatic feeding mixing truck is equipped with a high-pressure water gun, which is specially used to clean the body of the mixing truck, which can quickly peel and wash away the dirt, and give the mixing truck a clean "face", which is more economical and environmentally friendly.
以上就是全自动自上料搅拌车ttp://www.jufengjiaobanji.com/为大家介绍的内容,感谢您在百忙之中查看我公司的信息内容,如果您想要了解的更多,欢迎您来电进行咨询!
The above is the fully automatic self loading mixer ttp://www.jufengjiaobanji.com,Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!