Since the concrete will solidify into a hard block in a short time, and has certain corrosivity to steel and paint, it is a daily maintenance work to clean the concrete adhered to the concrete storage tank and the inlet and outlet after each use of the concrete tank. These include:

a.每次装料前用水冲洗进料口，使进料口在装料时保持湿润；

a. Flush the feed port with water before each loading to keep the feeding port moist during loading;

b.在装料的同时向随车自带的清洗用水水箱中注满水；

b. At the same time of loading, fill the water tank with water;

c.装料后冲洗进料口，洗净进料口附近残留的混凝土；

c. After loading, wash the inlet to clean the residual concrete near the inlet;

d.到工地卸料后，冲洗出料槽，然后向混凝土贮罐内加清洗用水30—40L；在车辆回程时保持混凝土搅拌罐车混凝土贮罐正向慢速转动；

d. After unloading at the construction site, wash the discharge tank, and then add 30-40l of cleaning water into the concrete storage tank; keep the concrete tank of the concrete mixing tank truck rotate slowly in the forward direction when the vehicle returns;

e.下次装料前切记放掉混凝土贮罐内的污水；

e. Remember to discharge the sewage in the concrete tank before the next loading;

f.每天收工时彻底清洗混凝土贮罐及进出料口周围，保证不粘有水泥及混凝土结块。

f. At the end of each day, the concrete storage tank and the area around the material inlet and outlet shall be thoroughly cleaned to ensure that there is no cement and concrete caking.

有了上面的小总结，希望对广大客户有所帮助，如果有什么不理解的或者寻求帮助的请点击我们的网站：全自动自上料搅拌车http://www.jufengjiaobanji.com或者来电咨询，我们会尽全力为您

With the above summary, I hope to help our customers. If you don't understand or ask for help, please click our website: Zhongke concrete mixer http://www.jufengjiaobanji.com Or call consultation, we will try our best to solve it for you