1. Before going out, the windscreens, headlights and taillights of the self loading mixer of Sinopec shall be wiped clean, and the safety facilities such as vehicle lights and brakes shall be checked to see if they are complete and effective. In addition, triangle warning signs or other warning signs shall be carried in the vehicle. When the mixer stops for maintenance in case of sudden failure, warning signs shall be placed 50 meters in front and back of the vehicle to remind other vehicles to pay attention 。
2. When driving in fog, remember to strictly abide by the traffic rules and speed limit. Never drive fast. The larger the fog, the shorter the visible distance, and the lower the speed of the automatic loading mixer.
3. Drive the automatic loading mixer in the fog at a low speed as much as possible, especially keep enough safe distance from the vehicle in front, and do not keep too close to it. Try to drive in the middle of the road instead of along the side of the road, in case of collision with vehicles temporarily stopping at the side of the road and waiting for the fog to disperse.
4. Pull over and stop at the right time. If the fog is too large, you can park the automatic loading mixer alongside, and turn on the low beam light and emergency light at the same time. After parking, get off from the right side, as far away from the road as possible. Never sit in the car to avoid being hit by a passing car. Wait for the fog to clear or the line of sight to be a little better before going on the road.
Do you understand the above introduction? If you don't understand, please call us. We will introduce you to you: http://www.jufengjiabangji.com/ welcome to visit.