混凝土搅拌站选购应注意的各个环节!

 来源:http://www.jufengjiaobanji.com 日期:2020-05-25 发布人:admin
  关于混凝土搅拌站的采购有很多的细节我们需要把握,今天来介绍以下:
  There are many details about the purchase of concrete mixing plant that we need to grasp. Today we will introduce the following:
  1、混凝土施工的性能编号。:用搅拌机
  1. Performance number of concrete construction. : with mixer
  搅拌主机是搅拌站更核心的组成部分,根据混凝土的性能标签来选择什么样的搅拌主机。如果水利工程必须选用双卧轴强制式全自动自上料搅拌车。此外,混凝土配料机和水泥仓的选择应根据混凝土搅拌材料的种类而定。
  Mixing machine is the core part of mixing plant. According to the performance label of concrete, what kind of mixing machine should be selected. If the water conservancy project must choose the double horizontal shaft forced concrete mixer. In addition, the selection of concrete batching machine and cement bin shall be determined according to the type of concrete mixing materials.
  2、混凝土工程量及施工期:选择搅拌站模型
  2. Concrete quantity and construction period: select mixing plant model
  利用这两个参数来选择混凝土搅拌站的大小。令混凝土的总任务量为A;混凝土浇筑天数为B;每天的工作时数为C;若利用系数为X,则应选择搅拌站规格X=A/(B*C*X),其中X为0.7-0.9。在选择时应考虑成品混凝土的运输条件。是直接泵还是通过车辆?输送装置的容积也是确定搅拌装置类型的重要依据。
  These two parameters are used to select the size of the concrete mixing plant. Make the total task amount of concrete a; the pouring days of concrete B; the working hours per day C; if the utilization coefficient is x, the mixing plant specification x = A / (b * c * x), where x is 0.7-0.9. Transportation conditions of finished concrete shall be considered in selection. Is it a direct pump or a vehicle? The volume of the conveying device is also an important basis for determining the type of mixing device.
  3.建设数量和建设周期:决定一个站还是两个战
  3. Construction quantity and construction cycle: determine one station or two battles
  当现场需要一次性浇筑混凝土的数量较大,质量要求较高,且附近没有混凝土搅拌站可以进行配筋时,更好选择两套较小的搅拌站,或者选择一套母配和一对双机配。
  When the quantity of concrete to be poured at one time is large and the quality requirements are high, and there is no concrete mixing station nearby for reinforcement, it is better to choose two sets of smaller mixing stations, or choose one set of mother mix and one pair of double machine mix.
  4. 交通状况
  4. Traffic conditions
  当现场交通不方便时,搅拌站维修人员进出现场需要花费大量时间,更好选择同样小尺寸的双站,或准备足够的备品备件,以保证施工进度的顺利进行。
  When the site traffic is not convenient, the maintenance personnel of the mixing station need to spend a lot of time in and out of the site. It is better to choose the same small size of two stations or prepare enough spare parts to ensure the smooth progress of the construction.
搅拌车
  5. 运输距离
  5. Transportation distance
  施工现场分散时,但工地之间的距离不太远,四川混凝土搅拌站的运输半径不超过30分钟的汽车,自卸车运输不超过10分钟的汽车。更好采用多工位集中搅拌,以提高搅拌站的利用率和建设经济效益。四川混凝土搅拌站
  When the construction site is scattered, but the distance between the construction sites is not too far. The transportation radius of Sichuan concrete mixing plant is not more than 30 minutes for automobiles, and that of dump trucks is not more than 10 minutes for automobiles. It is better to adopt multi station centralized mixing to improve the utilization rate of mixing station and construction economic benefits. Sichuan concrete mixing station
  6. 操作人员素质:大工位或小工位
  6. Operator quality: large station or small station
  一般来说,小型混凝土搅拌站机组零部件结构简单,控制系统简单,所以对操作维修人员的要求较低。而大型混凝土搅拌站结构复杂,自动化程度高,因此对操作人员的要求也较高。所以在购买混凝土搅拌站时,除了要考虑前几个因素外,还要考虑操作人员。
  Generally speaking, the components of small-scale concrete mixing plant are simple in structure and control system, so the requirements for operation and maintenance personnel are low. The large-scale concrete mixing plant has complex structure and high degree of automation, so the requirements for operators are also high. Therefore, when purchasing the concrete mixing plant, in addition to the first few factors, operators should also be considered.
  7. 配置选择:没有特殊要求
  7. Configuration selection: no special requirements
  一般情况下,厂家具有成熟的设备配置,如规格、数量、品种等。您在订购混合设备时也可以提出特殊要求,我们将尽努力满足您的要求。但选购的产品时,切忌贪大而齐全,这样会造成不必要的经济浪费。除了购买混凝土搅拌站设备外,除了参考不同厂家的外,还应特别注意不同厂家的配置清单。除以上规格、品种和数量外,更重要的是配件的生产厂家。
  Generally, the manufacturer has mature equipment configuration, such as specification, quantity, variety, etc. You can also make special requests when ordering the mixing equipment, and we will try our best to meet your requirements. However, when purchasing products, we must not be greedy and complete, which will cause unnecessary economic waste. In addition to the purchase of concrete mixing plant equipment, in addition to referring to the prices of different manufacturers, special attention should be paid to the configuration list of different manufacturers. In addition to the above specifications, varieties and quantities, the most important is the manufacturer of accessories.