在自上料混凝土搅拌罐车发生的事故中，很大一部分都是翻车原因造成的，混凝土搅拌罐车属于专用车，它跟普通的货车是不一样的，很多人开得了大货车，驾驶搅拌罐车还是有点困难的，它的相对较高，跟普通货车的驾驶方法是有区别的。那么导致搅拌罐车翻车的具体原因有哪些呢？

In the accidents caused by self loading concrete mixing tank trucks, a large part of them are caused by overturning. Concrete mixing tank trucks are specialized vehicles, which are different from ordinary trucks. Many people can drive large trucks, and driving mixing tank trucks is still a bit difficult. Its center of gravity is relatively high, and the driving method is different from that of ordinary trucks. So what are the specific reasons for the overturning of the mixing tank truck?

1.驾驶员的操作不当，自上料混凝土搅拌罐车较高，且在行驶途中，搅拌罐是处于匀速转动的状态，假如遇到转弯或者路况不好的情况下，控制不好车速和转速就容易导致搅拌罐车翻车，新手搅拌罐车司机一定要掌握好车速。

1. Improper operation by the driver. The center of gravity of the self loading concrete mixing tank truck is relatively high, and the mixing tank rotates at a constant speed during driving. If encountering turns or poor road conditions, poor control of the speed and speed can easily cause the mixing tank truck to overturn. New hand mixing tank truck drivers must master the speed.

2.路况恶劣，搅拌罐车一般都是从搅拌站装上混凝土，再运送到建筑工地上去，由于混凝土对环境有一定的污染，所以搅拌站一般都是建立在比较偏僻的地方，所以有的地方路况不是很好，搅拌罐车整车满载时又比较重，在驾驶过程中加上路况不好，稍不注意就有可能造成翻车，如果自己的驾驶技术不熟练，对于这种路况的活儿好不要接。

2. The road conditions are poor. Mixing tank trucks usually load concrete from the mixing station and transport it to the construction site. Due to the certain pollution of concrete to the environment, the mixing station is usually built in relatively remote places, so some places have poor road conditions. When the mixing tank truck is fully loaded, it is relatively heavy. In addition, the road conditions are not good during driving, and if not paid attention, it may cause overturning, If one is not proficient in driving, it is not advisable to take on tasks related to such road conditions.

怎么样才能避免翻车呢？

How can we avoid overturning?

搅拌罐车在重载时一定要注意，发动机转速好在1000-1400转/分范围内工作，这样发动机拥有大扭矩，在运送混凝土的过程中，车速好控制在40km/h，这样才能大程度的保证行车，在转弯之前一定要将车速降下来，然后再转弯，搅拌罐车在装运搅拌好的混凝土时，搅拌罐的转速为2-10转/分在运输过程中，比较平坦的额路面上搅拌罐的转速要保持在2-3转/分，行驶在侧倾坡大于50度的路面，或左右晃动较大的路面时，应停止搅拌罐转动，等路况好转后在恢复转动。

When the mixing tank truck is under heavy load, it is important to pay attention to the engine speed range of 1000-1400 rpm, so that the engine has high torque. During the transportation of concrete, the speed should be controlled at 40km/h to ensure driving safety to a large extent. Before turning, the speed must be reduced before turning. When the mixing tank truck is transporting mixed concrete, the speed of the mixing tank is 2-10 rpm during transportation, On a relatively flat road surface, the speed of the mixing tank should be maintained at 2-3 revolutions per minute. When driving on a road surface with a slope greater than 50 degrees or a road surface with significant left and right shaking, the mixing tank should be stopped from rotating until the road conditions improve before resuming rotation.

自上料混凝土搅拌罐车翻车现象频发的原因以及避免事项已经为您解答完毕了，希望能够给您好的帮助，更多事项就来我们网站http://www.jufengjiaobanji.com咨询了解吧！

The reasons for the frequent overturning of self feeding concrete mixing tank trucks and the precautions to avoid have been explained for you. We hope to provide you with good help. For more information, please visit our website http://www.jufengjiaobanji.com Consult and understand!