1. Prepare the emergency drive hose, turn off the small concrete mixer, and remove the high-pressure oil pipe connector on the hydraulic motor.
2. Turn off the rescue vehicle, remove the high-pressure oil pipe of its hydraulic motor, and connect it with the corresponding connector on the faulty vehicle with emergency drive hose.
3. Start the rescue vehicle, turn its control handle to the discharging position, and the concrete in the failure vehicle will be discharged.
4. After the emergency drive, remove the drive hose and restore the two vehicles to their original state.
Put a wedge between the roller and the raceway to control the rotation of the mixing drum. Pay attention to safety. Turn off the engine and loosen a high-pressure oil pipe of the hydraulic motor. The mixing drum can rotate freely. Control the rotation of the mixing drum to turn the maintenance hole to the lower part, and then open the maintenance hole to clean up the concrete in the drum. At this time, we must pay attention to safety. After the concrete is discharged, we should restore the small concrete mixer to its original state.
In general, most people will choose to use method to solve the problem. When method one can't solve the problem, they will choose method two. I hope the above methods are helpful to you, more wonderful content please continue to pay attention to us.
This article is a wonderful content provided by Zhongke self feeding mixer for you today. For more wonderful content, please click to enter the website http://www.jufengjiaobanji.com To view, more wonderful content can click on the relevant page to view