Today, I'd like to introduce the reason of high temperature agitator to you. Let's have a brief understanding of the reason of high temperature agitator. Here is the data I collected from the summary for your reference:

一、冷却风扇不转。冷却风扇可由温度开关控制;它也可以由水温传感器控制。

1、 The cooling fan does not turn. The cooling fan can be controlled by a temperature switch; it can also be controlled by a water temperature sensor.

2. 冷却介质不足。防冻液:高档车全年均需添加防冻液;水或蒸馏水:临时代用品;水箱盖漏水了。

2. Insufficient cooling medium. Antifreeze: antifreeze needs to be added to high-grade cars all year round; water or distilled water: temporary substitutes; water tank cover is leaking.

3.恒温器坏了。如果要拆卸恒温器，则应堵塞小的循环，以便保证冷却剂全部由水箱加热;安装新温控器时，应注意有水孔，如桑塔纳没有水孔，此时应用6mm钻孔。一个功能是标记;另一个影响是汽车在加热过程中，两边温控器的温度差，使温控器随水温准确打开。

3. The thermostat is broken. If the thermostat is to be disassembled, the small circulation shall be blocked to ensure that all the coolant is heated by the water tank; when installing the new thermostat, attention shall be paid to the existence of water holes. If there is no water hole in Santana, 6mm drilling shall be applied at this time. One function is to mark; the other is to make the temperature difference between the temperature controllers on both sides of the car open accurately with the water temperature during the heating process.

水箱堵塞了。(1)用水或气体进行外部堵塞以污垢;内部的堵塞会影响冷却剂的循环，产生压力，然后会有两种结果，一是水箱泄漏，另一种是在水温特别高的时候高速运行。

The water tank is blocked. (1) Water or gas is used for external blocking to remove dirt; internal blocking will affect the circulation of coolant and generate pressure, and then there will be two results: one is water tank leakage, the other is high-speed operation when the water temperature is particularly high.

5、泵衰竭。(1)叶轮打滑或卡死，造成正时皮带断裂;(2)叶轮变形。

5. Pump failure. (1) The impeller slips or gets stuck, causing the timing belt to break; (2) the impeller is deformed.

汽缸侵蚀。(1)燃烧室和通道，此时会从排水管排出或白烟，导致水箱经常缺水;(2)水路、油路(油有水白);(3)水渠与水渠之间，造成热缸体不良，特别是在高速时冲击较大;通道被阻塞了。

Cylinder erosion. (1) At this time, the combustion chamber and channel will be discharged from the drain pipe or white smoke, resulting in frequent water shortage of the water tank; (2) the water way and oil way (oil has white water); (3) between the water channel and the water channel, resulting in poor thermal cylinder block, especially in high-speed impact; the channel is blocked.

七、点火正时不正确。

7、 Incorrect ignition timing.

以上就是搅拌器水温过高的原因。我们将不断完善自我，以稳定的产品质量，周到的销售服务来回报新老客户。欢迎与我们洽谈合作。本公司愿与海纳百川的胸怀携手共进，广交朋友。

That's why the water temperature of the agitator is too high. We will constantly improve ourselves to return new and old customers with stable product quality and thoughtful sales service. Welcome to discuss and cooperate with us. The company is willing to work hand in hand with the mind of Haina Baichuan to make friends.