It should be done before the mixing car of Zhongke Jufeng
1. Check carefully, find and remove faults in time
1) There has never been a heavy vehicle fracture on the road, otherwise there will be trouble. Generally, concrete cannot be stopped for more than 2 hours, and C40 concrete cannot be stopped.
2) Before ignition, check the oil, antifreeze, lubricating oil, cooling water, etc. if it is found insufficient, add it again.
3) After the car starts, let it rotate at a low speed, check the tire pressure around the car, and check whether there is any leaking tire. Then use a screwdriver to remove the stones in the tire gap and check.
4) Is there a nail or something stuck in the tire!
5) Recheck the lights, especially the waist lights, to be sure to shine on the edge of the tire. Steel and other things are often stacked randomly on the construction site, and the side of the tire is very fragile.
6) Wipe the mirror and the glass on both sides with a rag. The construction site is complex with poor light. First of all, make sure you see!
2. Make sure there is enough water in the water tank and water reducer
Due to various reasons, the material is too dry, there is no water added to the material, which is a lifeline, otherwise the pot is waiting for 10000 ocean.
3. Ensure that the mixing tank is in the stop state
Because when the engine starts, if the oil tank rotates at a high speed, the instantaneous force will be great, and the reducer will be hurt.
For safe driving, please check your concrete mixer as shown above. Our company is a professional manufacturer of mixer truck. Welcome to inquire about the price of mixer truck,