减少全自动上料搅拌车部件磨损的方法

 来源:http://www.jufengjiaobanji.com 日期:2021-01-25 发布人:zhongke
1.保持自动上料搅拌机装置的额定负荷
1. Maintain the rated load of the automatic feeding mixer device
这种工程机械上的载荷的性质和大小对设备部件的损失有重大影响。通常,机械零件的磨损会随着负载的增加而增加。当零件上的负载高于设当工作量高时,组件上的磨损继续增加。
The nature and size of the load on the construction machinery have a significant impact on the loss of equipment components. Generally, the wear of mechanical parts will increase with the increase of load. When the load on the part is higher than the design, when the workload is high, the wear on the assembly continues to increase.
2.及时清洁以减少机械杂质对设备的影响
2. Clean in time to reduce the impact of mechanical impurities on the equipment
机械杂质通常是指建筑机械在使用过程中产生的诸如灰尘,土壤以及一些金属屑和油脂污渍之类的材料。当这些杂质到达机器的工作表面之间时,危害更大。它不仅增加了摩擦,还增加了油耗。并且它会破坏润滑膜并损坏配合表面。
Mechanical impurities usually refer to materials such as dust, soil and some metal scraps and grease stains produced in the use of construction machinery. When these impurities reach between the working surfaces of the machine, the harm is greater. It not only increases friction, but also increases fuel consumption. And it will damage the lubricating film and the mating surface.
3.自动上料搅拌机,防止卡车零件腐蚀
3. Automatic feeding mixer to prevent corrosion of truck parts
中科自上料搅拌机
腐蚀作用在零件上,很难发现,容易忽略,并且危害更大。空气中的雨水和化学物质通过管道和机器零件的间隙进入机器,并腐蚀零件。对腐蚀零件的持续工作会加速机器磨损并增加机械故障。因此,管理人员和操作人员需要根据当时的天气条件和现场条件采用合理的施工系统,以地减少化学腐蚀对机械零件的有害影响。有。
Corrosion on parts is difficult to find, easy to ignore and more harmful. Rainwater and chemicals in the air enter the machine through the gap between pipes and machine parts, and corrode the parts. Continuous work on corroded parts will accelerate machine wear and increase mechanical failure. Therefore, managers and operators need to adopt reasonable construction system according to the weather conditions and site conditions at that time, so as to minimize the harmful effects of chemical corrosion on mechanical parts. yes.
4.保持全自动上料搅拌车的设备部件的适当温度
4. Keep the proper temperature of the equipment parts of the automatic feeding mixer
在工作期间,每个组件的温度都有其自己的正常范围。如果温度过高或过低,都会影响零件的强度,因此有必要使用冷却液和润滑剂控制某些零件的温度,以在适当的温度范围内运行。
During operation, the temperature of each component has its own normal range. If the temperature is too high or too low, it will affect the strength of the parts, so it is necessary to use coolant and lubricant to control the temperature of some parts in order to operate in the appropriate temperature range.
精彩的内容不多,看到就赶快收藏吧!中科自上料搅拌机为大家推送精彩的内容,请大家关注我们的网址:http://www.jufengjiaobanji.com,值得推荐!
There are not many wonderful contents. Please collect them as soon as you see them! Zhongke self feeding mixer will push wonderful content for you. Please pay attention to our website: http://www.jufengjiaobanji.com It's worth recommending!